Ok,
better like this ?
Index: arch/mips/config.in
===================================================================
RCS file: /cvs/linux/arch/mips/config.in,v
retrieving revision 1.48
diff -u -r1.48 config.in
--- arch/mips/config.in 2000/03/29 00:18:16 1.48
+++ arch/mips/config.in 2000/04/03 15:23:58
@@ -114,83 +114,83 @@
mainmenu_option next_comment
comment 'General setup'
-if [ "$CONFIG_DECSTATION" = "y" -o "$CONFIG_DDB5074" = "y" ]; then
- define_bool CONFIG_CPU_LITTLE_ENDIAN y
-else
- bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
-fi
-
-if [ "$CONFIG_PROC_FS" = "y" ]; then
- define_bool CONFIG_KCORE_ELF y
-fi
-define_bool CONFIG_ELF_KERNEL y
-
-if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
- define_bool CONFIG_BINFMT_IRIX y
- define_bool CONFIG_FORWARD_KEYBOARD y
-fi
-define_bool CONFIG_BINFMT_AOUT n
-define_bool CONFIG_BINFMT_ELF y
-tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-
-bool 'Networking support' CONFIG_NET
-
-source drivers/pci/Config.in
-source drivers/pcmcia/Config.in
-
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
-
-if [ "$CONFIG_SGI_IP22" != "y" -a "$CONFIG_DECSTATION" != "y" -a
"$CONFIG_BAGET_MIPS" != "y" ]; then
- source drivers/parport/Config.in
-fi
+ if [ "$CONFIG_DECSTATION" = "y" -o "$CONFIG_DDB5074" = "y" ]; then
+ define_bool CONFIG_CPU_LITTLE_ENDIAN y
+ else
+ bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
+ fi
+
+ if [ "$CONFIG_PROC_FS" = "y" ]; then
+ define_bool CONFIG_KCORE_ELF y
+ fi
+ define_bool CONFIG_ELF_KERNEL y
+
+ if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
+ define_bool CONFIG_BINFMT_IRIX y
+ define_bool CONFIG_FORWARD_KEYBOARD y
+ fi
+ define_bool CONFIG_BINFMT_AOUT n
+ define_bool CONFIG_BINFMT_ELF y
+ tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
+
+ bool 'Networking support' CONFIG_NET
+
+ if [ "$CONFIG_PCI" = "y" ]; then
+ source drivers/pci/Config.in
+ fi
+
+ bool 'System V IPC' CONFIG_SYSVIPC
+ bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
+ bool 'Sysctl support' CONFIG_SYSCTL
+
+ source drivers/parport/Config.in
+
+ bool 'Enable loadable module support' CONFIG_MODULES
+ if [ "$CONFIG_MODULES" = "y" ]; then
+ bool ' Set version information on all symbols for modules'
CONFIG_MODVERSIONS
+ bool ' Kernel module loader' CONFIG_KMOD
+ fi
+
+ if [ "$CONFIG_DECSTATION" = "y" ]; then
+ bool 'TURBOchannel support' CONFIG_TC
+ fi
endmenu
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
- bool ' Set version information on all symbols for modules'
CONFIG_MODVERSIONS
- bool ' Kernel module loader' CONFIG_KMOD
+if [ "$CONFIG_ISA" = "y" ]; then
+ source drivers/pnp/Config.in
fi
-
-source drivers/pci/Config.in
-endmenu
-
-if [ "$CONFIG_DECSTATION" = "y" ]; then
- mainmenu_option next_comment
- comment 'TURBOchannel support'
- bool 'TURBOchannel support' CONFIG_TC
-# if [ "$CONFIG_TC" = "y" ]; then
-# tristate ' MAGMA Parallel port support' CONFIG_PARPORT
-# fi
- endmenu
+if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
+ source drivers/pcmcia/Config.in
fi
-source drivers/pnp/Config.in
-
source drivers/block/Config.in
if [ "$CONFIG_NET" = "y" ]; then
source net/Config.in
fi
-
-source drivers/telephony/Config.in
-
-mainmenu_option next_comment
-comment 'ATA/IDE/MFM/RLL support'
-
-tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
-if [ "$CONFIG_IDE" != "n" ]; then
- source drivers/ide/Config.in
-else
- define_bool CONFIG_BLK_DEV_IDE_MODES n
- define_bool CONFIG_BLK_DEV_HD n
+if [ "$CONFIG_DECSTATION" != "n" -a \
+ "$CONFIG_SGI_IP22" != "n" ]; then
+ source drivers/telephony/Config.in
+fi
+
+if [ "$CONFIG_SGI_IP22" != "n" -a \
+ "$CONFIG_DECSTATION" != "n" ]; then
+
+ mainmenu_option next_comment
+ comment 'ATA/IDE/MFM/RLL support'
+
+ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
+
+ if [ "$CONFIG_IDE" != "n" ]; then
+ source drivers/ide/Config.in
+ else
+ define_bool CONFIG_BLK_DEV_IDE_MODES n
+ define_bool CONFIG_BLK_DEV_HD n
+ fi
+ endmenu
fi
-endmenu
mainmenu_option next_comment
comment 'SCSI support'
@@ -202,7 +202,10 @@
fi
endmenu
-source drivers/i2o/Config.in
+if [ "$CONFIG_DECSTATION" != "n" -a \
+ "$CONFIG_SGI_IP22" != "n" ]; then
+ source drivers/i2o/Config.in
+fi
if [ "$CONFIG_NET" = "y" ]; then
mainmenu_option next_comment
@@ -210,8 +213,13 @@
bool 'Network device support' CONFIG_NETDEVICES
if [ "$CONFIG_NETDEVICES" = "y" ]; then
- if [ "$CONFIG_SGI_IP22" != "y" -a "$CONFIG_DECSTATION" != "y" -a
"$CONFIG_BAGET_MIPS" != "y" ]; then
+
+ if [ "$CONFIG_SGI_IP22" != "y" -a \
+ "$CONFIG_DECSTATION" != "y" -a \
+ "$CONFIG_BAGET_MIPS" != "y" ]; then
+
source drivers/net/Config.in
+
if [ "$CONFIG_ATM" = "y" ]; then
source drivers/atm/Config.in
fi
@@ -239,8 +247,11 @@
fi
endmenu
fi
+
+if [ "$CONFIG_SGI_IP22" != "y" -a \
+ "$CONFIG_DECSTATION" != "y" -a \
+ "$CONFIG_BAGET_MIPS" != "y" ]; then
-if [ "$CONFIG_SGI_IP22" != "y" -a "$CONFIG_DECSTATION" != "y" -a
"$CONFIG_BAGET_MIPS" != "y" ]; then
source drivers/net/hamradio/Config.in
mainmenu_option next_comment
@@ -264,20 +275,20 @@
endmenu
fi
-if [ "$CONFIG_DECSTATION" != "y" ]; then
+if [ "$CONFIG_DECSTATION" != "n" -a \
+ "$CONFIG_SGI_IP22" != "n" ]; then
source drivers/char/Config.in
-else
+fi
+
+if [ "$CONFIG_DECSTATION" = "y" ]; then
mainmenu_option next_comment
- comment 'DECstation Character devices'
+ comment 'DECStation Character devices'
bool 'Virtual terminal' CONFIG_VT
if [ "$CONFIG_VT" = "y" ]; then
bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
fi
tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
- if [ "$CONFIG_SGI_IP22" = "y" ]; then
- bool 'SGI PROM Console Support' CONFIG_SGI_PROM_CONSOLE
- fi
if [ "$CONFIG_SERIAL" = "y" ]; then
bool 'DZ11 Serial Support' CONFIG_DZ
if [ "$CONFIG_TC" = "y" ]; then
@@ -294,30 +305,43 @@
bool 'Enhanced Real Time Clock Support' CONFIG_RTC
endmenu
fi
-
-source drivers/usb/Config.in
-#source drivers/misc/Config.in
-
-source fs/Config.in
-
-if [ "$CONFIG_VT" = "y" ]; then
+if [ "$CONFIG_SGI_IP22" = "y" ]; then
mainmenu_option next_comment
- comment 'Console drivers'
- if [ "$CONFIG_SGI_IP22" = "y" ]; then
+ comment 'SGI Character devices'
+ bool 'Virtual terminal' CONFIG_VT
+ if [ "$CONFIG_VT" = "y" ]; then
+ bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE
if [ "$CONFIG_SGI_NEWPORT_CONSOLE" != "y" ]; then
define_bool CONFIG_DUMMY_CONSOLE y
else
define_bool CONFIG_FONT_8x16 y
fi
- else
+ bool 'SGI PROM Console Support' CONFIG_SGI_PROM_CONSOLE
+ fi
+ bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
+ if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
+ int 'Maximum number of Unix98 PTYs in use (0-2048)'
CONFIG_UNIX98_PTY_COUNT 256
+ fi
+ endmenu
+fi
+
+#The ones having USB should include it
+#source drivers/usb/Config.in
+
+
+source fs/Config.in
+
+if [ "$CONFIG_VT" = "y" ]; then
+ mainmenu_option next_comment
+
+ comment 'Console drivers'
if [ "$CONFIG_DECSTATION" != "y" ]; then
bool 'VGA text console' CONFIG_VGA_CONSOLE
fi
- bool 'Support for frame buffer devices' CONFIG_FB
- source drivers/video/Config.in
- fi
+ bool 'Support for frame buffer devices' CONFIG_FB
+ source drivers/video/Config.in
endmenu
fi
@@ -339,7 +363,6 @@
mainmenu_option next_comment
comment 'Kernel hacking'
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
if [ "$CONFIG_MODULES" = "y" ]; then
bool ' Build fp execption handler module' CONFIG_MIPS_FPE_MODULE
--
Florian Lohoff flo@rfc822.org +49-5241-470566
"Technology is a constant battle between manufacturers producing bigger and
more idiot-proof systems and nature producing bigger and better idiots."
|