Hi,
this is is a short output of the 2.3.21 booting on the Decstation
5000/150 ... This is the current oss.sgi.com CVS.
--------------------------------------------------------------
This DECstation is a DS5000/1xx
Loading R4000 MMU routines.
CPU revision is: 00000430
Primary instruction cache 8kb, linesize 16 bytes)
Primary data cache 8kb, linesize 16 bytes)
Secondary cache sized at 1024K linesize 32
Linux version 2.3.21 (root@repeat) (gcc version egcs-2.90.27 980315 (egcs-1.0.2
release)) #1 Tue Jan 4 18:39:20 GMT 2000
Calibrating delay loop... 49.81 BogoMIPS
Memory: 62652k/65532k available (1068k kernel code, 1524k data)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
TURBOchannel rev. 1 at 12.5 MHz (no parity)
slot 0: DEC PMAZ-AA V5.3d
slot 1: DEC PMAZ-AA V5.3b
slot 2: DEC PMAF-FA V1.1
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (established 4096 bind 8192)
Starting kswapd v1.6
DECstation Z8530 serial driver version 0.03
tty00 at 0xbc100001 (irq = 4) is a Z85C30 SCC
tty01 at 0xbc100009 (irq = 4) is a Z85C30 SCC
tty02 at 0xbc180001 (irq = 4) is a Z85C30 SCC
tty03 at 0xbc180009 (irq = 4) is a Z85C30 SCC
SCSI ID 7 Clk 25MHz CCF=5 TOut 167 NCR53C9x(esp236)
SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236)
SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236)
ESP: Total of 3 ESP hosts found, 3 actually in use.
scsi0 : ESP236 (NCR53C9x)
scsi1 : ESP236 (NCR53C9x)
scsi2 : ESP236 (NCR53C9x)
scsi : 3 hosts.
Vendor: Quantum Model: XP34300 Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST15150N Rev: 8902
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
scsi : detected 2 SCSI disks total.
esp0: target 0 [period 200ns offset 15 5.00MHz synchronous SCSI]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8399520 [4101 MB] [4.1 GB]
esp0: target 2 [period 200ns offset 15 5.00MHz synchronous SCSI]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB]
declance.c: v0.008 by Linux Mips DECstation task force
eth0: IOASIC onboard LANCE, addr = 08:00:2b:28:f0:a3, irq = 3
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 193.189.250.46, my address is 193.189.250.44
-----------------------------------------------------
I see some more ugly things:
Setting flush to zero for dpkg-source.
Unimplemented exception for insn 4620a0a4 at 0x0046f084 in dpkg-source.
Should send SIGFPE to dpkg-source
Setting flush to zero for dpkg-source.
Unimplemented exception for insn 4620a0a4 at 0x0046f084 in dpkg-source.
Should send SIGFPE to dpkg-source
Setting flush to zero for dpkg-source.
Unimplemented exception for insn 4620a0a4 at 0x0046f084 in dpkg-source.
Should send SIGFPE to dpkg-source
And this ...
Bug in get_wchan
This seems to be a result of buggy "procps" ...
Flo
--
Florian Lohoff flo@rfc822.org +49-5241-470566
... The failure can be random; however, when it does occur, it is
catastrophic and is repeatable ... Cisco Field Notice
|