linux-mips
[Top] [All Lists]

Re: able to bootp/NFS-install/reboot R4400SC Indy

To: Joan Eslinger <wombat@kilimanjaro.engr.sgi.com>
Subject: Re: able to bootp/NFS-install/reboot R4400SC Indy
From: Eric Melville <m_thrope@rigelfore.com>
Date: Wed, 17 Feb 1999 22:54:41 -0800
Cc: Alex deVries <adevries@engsoc.carleton.ca>, SGI Linux <linux@cthulhu.engr.sgi.com>
Organization: iLL
References: <199902170714.XAA09589@kilimanjaro.engr.sgi.com>
Sender: owner-linux@cthulhu.engr.sgi.com
wait a sec, this is almost identical to mine! R4400 revision 6.0 ... the
only difference i see is that mine was 200 mhz. what's up with this?
please, i'd love to get this thing booted so that i can start helping
with the porting efforts!

-E

> % hinv
> Iris Audio Processor: version A2 revision 4.1.0
> 1 175 MHZ IP22 Processor
> FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
> CPU: MIPS R4400 Processor Chip Revision: 6.0
> On-board serial ports: 2
> On-board bi-directional parallel port
> Data cache size: 16 Kbytes
> Instruction cache size: 16 Kbytes
> Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
> Main memory size: 64 Mbytes
> Vino video: unit 0, revision 0, IndyCam not connected
> Integral ISDN: Basic Rate Interface unit 0, revision 1.0
> Integral Ethernet: ec0, version 1
> Integral SCSI controller 0: Version WD33C93B, revision D
>   Disk drive: unit 2 on SCSI controller 0
>   Disk drive: unit 1 on SCSI controller 0
> Graphics board: Indy 24-bit

<Prev in Thread] Current Thread [Next in Thread>