linux-mips
[Top] [All Lists]

Re: kernel build problem.

To: ralf@uni-koblenz.de
Subject: Re: kernel build problem.
From: Alex deVries <adevries@engsoc.carleton.ca>
Date: Thu, 24 Dec 1998 10:31:16 -0500 (EST)
Cc: SGI Linux <linux@cthulhu.engr.sgi.com>
In-reply-to: <19981223054440.E6183@uni-koblenz.de>
Sender: owner-linux@cthulhu.engr.sgi.com
On Wed, 23 Dec 1998 ralf@uni-koblenz.de wrote:
> Add -mno-split-addresses to CFLAGS.  Your egcs still enables that optimization
> by default.

Alright.  That made it build.

Now when I build it and boot that kernel I get in the Command Monitor:

Exception: <vector=UTLB Miss>
Status register: 0x300004803<CU1,CU0,IM4,IPL=???,MODE=KERNEL,EXL,IE>
Cause register: 0x8008<CE=0,IP8,EXC=RMISS>
Exception PC: 0x881385cc, Exception RA: 0x88002614
exception, bad address: 0x47c4
Local I/O interrupt register 1: 0x80 <VR/GIO2>
  Saved user regs in hex (&gpda 0xa8740e48, &_regs 0xa8741048):
  arg: 7 8bfff938 8bfffc4d 880025dc
  tmp: 8818c14c 8818c14c 10 881510c4 14 8bfad9e0 0 48
  sve: 8bfdf3e8 8bfffc40 8bfb2720 8bfff938 a8747420 9fc56394 0 9fc56394
  t8 48 t9 8bfffee66 at 1 v0 0 v1 8bfff890 k1 bad11bad
  gp 881dfd90 fp 9fc4be88 sp 8bfff8b8 ra 88002614

PANIC: Unexpected exception

I can mail my .config if that helps.

- Alex


<Prev in Thread] Current Thread [Next in Thread>