linux-mips
[Top] [All Lists]

SCSI problem solved

To: linux@cthulhu.engr.sgi.com
Subject: SCSI problem solved
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Sun, 13 Sep 1998 00:38:02 +0200
Sender: owner-linux@cthulhu.engr.sgi.com
Right now I'm doing some stress test with my Indy (dd from DAT and untaring
a tar file from one disk to another at the same time). And it hasn't crashed.
Below is the patch I'm using. If it works for others too, I'll check it in.

Thomas.

Index: sgiwd93.c
===================================================================
RCS file: /var/mips/linus/cvs/linux/drivers/scsi/sgiwd93.c,v
retrieving revision 1.8
diff -u -r1.8 sgiwd93.c
--- sgiwd93.c   1998/08/25 09:18:49     1.8
+++ sgiwd93.c   1998/09/12 22:32:01
@@ -77,7 +77,7 @@
 
 static int dma_setup(Scsi_Cmnd *cmd, int datainp)
 {
-       struct WD33C93_hostdata *hdata = CMDHOSTDATA(cmd);
+       struct WD33C93_hostdata *hdata = (struct WD33C93_hostdata 
*)cmd->host->hostdata;
        wd33c93_regs *regp = hdata->regp;
        struct hpc3_scsiregs *hregs = (struct hpc3_scsiregs *) cmd->host->base;
        struct hpc_chunk *hcp = (struct hpc_chunk *) hdata->dma_bounce_buffer;
@@ -89,14 +89,14 @@
 
        hdata->dma_dir = datainp;
 
-       if(cmd->use_sg) {
+       if(cmd->SCp.buffers_residual) {
                struct scatterlist *slp = cmd->SCp.buffer;
                int i, totlen = 0;
 
 #ifdef DEBUG_DMA
                printk("SCLIST<");
 #endif
-               for(i = 0; i <= (cmd->use_sg - 1); i++, hcp++) {
+               for(i = 0; i <= cmd->SCp.buffers_residual; i++, hcp++) {
 #ifdef DEBUG_DMA
                        printk("[%p,%d]", slp[i].address, slp[i].length);
 #endif
@@ -146,7 +146,7 @@
 static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
                     int status)
 {
-       struct WD33C93_hostdata *hdata = INSTHOSTDATA(instance);
+       struct WD33C93_hostdata *hdata = (struct WD33C93_hostdata 
*)instance->hostdata;
        wd33c93_regs *regp = hdata->regp;
        struct hpc3_scsiregs *hregs = (struct hpc3_scsiregs *) 
SCpnt->host->base;
 
@@ -163,7 +163,7 @@
        hregs->ctrl = 0;
 
        /* See how far we got and update scatterlist state if necessary. */
-       if(SCpnt->use_sg) {
+       if(SCpnt->SCp.buffers_residual) {
                struct scatterlist *slp = SCpnt->SCp.buffer;
                int totlen, wd93_residual, transferred, i;
 
@@ -183,7 +183,7 @@
 #ifdef DEBUG_DMA
                        printk("Jed was here...");
 #endif
-                       for(i = 0; i <= (SCpnt->use_sg - 1); i++) {
+                       for(i = 0; i <= SCpnt->SCp.buffers_residual; i++) {
                                if(slp[i].length >= transferred)
                                        break;
                                transferred -= slp[i].length;
@@ -193,10 +193,10 @@
 #ifdef DEBUG_DMA
                        printk("did it all...");
 #endif
-                       i = (SCpnt->use_sg - 1);
+                       i = SCpnt->SCp.buffers_residual;
                }
                SCpnt->SCp.buffer = &slp[i];
-               SCpnt->SCp.buffers_residual = (SCpnt->use_sg - 1 - i);
+               SCpnt->SCp.buffers_residual = SCpnt->SCp.buffers_residual - i;
                SCpnt->SCp.ptr = (char *) slp[i].address;
                SCpnt->SCp.this_residual = slp[i].length;
        }
@@ -244,7 +244,7 @@
        wd33c93_init(sgiwd93_host, (wd33c93_regs *) 0xbfbc0003,
                     dma_setup, dma_stop, WD33C93_FS_16_20);
 
-       hdata = INSTHOSTDATA(sgiwd93_host);
+       hdata = (struct WD33C93_hostdata *)sgiwd93_host->hostdata;
        hdata->no_sync = 0;
        hdata->dma_bounce_buffer = (uchar *) (KSEG1ADDR(buf));
        dma_cache_wback_inv((unsigned long) buf, PAGE_SIZE);

-- 
See, you not only have to be a good coder to create a system like Linux,
you have to be a sneaky bastard too ;-)
                   [Linus Torvalds in <4rikft$7g5@linux.cs.Helsinki.FI>]

<Prev in Thread] Current Thread [Next in Thread>