I got a compiled kernel from Oliver (greetings to him). I recieve almost
the same error messages as before.
Obviously worked the kernel with Oliver's Indy:
> PROMLIB: SGI ARCS firmware Version 1 Revision 10
> PROMLIB: Total free ram 64589824 bytes (63076K,61MB)
> ARCH: SGI-IP22
> CPU: MIPS-R5000 FPU<MIPS-R5000FPC> ICACHE DCACHE SCACHE
> Loading R4000 MMU routines.
> CPU revision is: 00002310
> Primary instruction cache 32768kb, linesize 32 bytes)
> Primary data cache 32768kb, linesize 32 bytes)
> MC: SGI memory controller Revision 3
> R4600/R5000 SCACHE size 512K linesize 128 bytes
> Enabling R4600 SCACHE
> calculating r4koff... 000e3328(930600)
But here's the output I got from my Indy. (reserved for misspellings :)
PROMLIB: SGI ARCS firmware Version 1 Revision 10
PROMLIB: Total free ram 32284672 bytes (31528K,30MB)
RCH: SGI-IP22
CPU: MIPS-R4000 FPU<MIPS-R400FPC> ICACHE DCACHE SCACHE
Loading R4000 MMU routines
CPU revision is: 00000430
Primary instruction cache 8192kb, linesize 16 bytes)
Primary data cache 8192kb, linesize 16 bytes)
Secondary cache sized at 1024K linesize 128
MC: SGI memory controller Revision 3
R4600/R5000 SCACHE size 0K linesize 128 bytes
calculating r4koff... 0003fd7c(261500)
GFX INIT: SHMIQ setup
...
Memory: 28104k/163372k available (1068k kernel code, 2352 data)
...
Checking for 'wait' instruction... unavailable.
...
loop: registered device at major 7
WD93: Driver version 1.25 compiled on ...
debug_flags=0x00
wd33c93-0: chip=WD33c93B/13 no_sync=0xff no_dma=0scsi0 : SGI WD93
scsi : 1 host.
sending SDTR 0103013f0csync_xfer=2c<1>Unable to handle kernel paging
request at virtual address c0000068, epc == 88022ec0, ra == 880dccf4
Aiee, killing interrupt handler
Kernel panic: Attempted to kill the idle task
In swapper task - not syncing
Puh..
BTW, isn't this kernel supposed to work on my Indy?
Thank you very much.
- Ulf
|