linux-mips
[Top] [All Lists]

Re: Booting Linux from second disk

To: eak@detroit.sgi.com
Subject: Re: Booting Linux from second disk
From: Ralf Baechle <ralf@mailhost.uni-koblenz.de>
Date: Sat, 16 Aug 1997 00:51:02 +0200 (MET DST)
Cc: miguel@nuclecu.unam.mx, jeremyw@motown.detroit.sgi.com, linux@cthulhu.engr.sgi.com, linux-progress@cthulhu.engr.sgi.com
In-reply-to: <33F4B980.A17A25CD@cygnus.detroit.sgi.com> from "Eric Kimminau" at Aug 15, 97 04:18:08 pm
Sender: owner-linux@cthulhu.engr.sgi.com
> boot -f bootp()labb.detroit:/tftpboot/linux/vmlinux
> nfsaddrs=169.238.129.18,169.238.129.5
> 
> labb (tftpboot server=169.238.129.5, linux=169.238.129.18)
> 
> It boots but as soon as it sees the ethernet driver we get this:
> 
> eth0: SGI Seeq8003 08:00:69:07:e6:29  (which is our correct MAC addr)_
> Unable to handle kernel paging request at virtual address 00000008, epc
> == 880cbc5c, ra == 880cbc3c

Could you send me the disassembler output of the kernel you've booted?
Use command like

  mips-linux-objdump -d vmlinux --start-address=0x880cbb00 
--stop-address=0x880cd00

to produce the dissassembler listing.

  Ralf

<Prev in Thread] Current Thread [Next in Thread>