linux-mips
[Top] [All Lists]

Re: SYMMMMETRRRRIC MULTI PENGUINNNNNNN!!!!!!

To: "David S. Miller" <davem@caip.rutgers.edu>
Subject: Re: SYMMMMETRRRRIC MULTI PENGUINNNNNNN!!!!!!
From: John Vozza <john@netrom.com>
Date: Mon, 1 Apr 1996 21:01:44 -0500 (EST)
Cc: sparclinux@vger.rutgers.edu, linux-kernel@vger.rutgers.edu, linux-smp@vger.rutgers.edu, lmlinux@neteng.engr.sgi.com, user@host.rutgers.edu
In-reply-to: <199604011242.HAA00427@huahaga.rutgers.edu>
Sender: owner-linux@cthulhu.engr.sgi.com
Can you say jealous!!!! Just had to reply... plz no flames!
Sure beats my 486dx100 =(



On Mon, 1 Apr 1996, David S. Miller wrote:

> 
> (yeah, it runs shell and basic programs, I can telnet out etc.
> but it hard-locks now and then, working on it...)
> 
> Any questions?  And remember kids, Linux is just a "toy operating
> system."
> 
> PROMLIB: Sun Boot Prom Version 3 Revision 2
> ARCH: SUN4M
> TYPE: Sun4m SparcStation10
> Ethernet address: 8:0:20:12:53:32
> Found 4 CPU prom device tree node(s).
> IOMMU: impl 0 vers 1 page table at f03c0000 of size 65536 bytes
> sbus0: Clock 20.0 MHz
> dma0: Revision 2 
> dma1: Revision 2 
> cgsix0 at 0x20000000
> Console: 16 point font, 864 scans
> Console: colour SUN 128x54, 1 virtual console (max 63)
> Calibrating delay loop.. ok - 115.51 BogoMIPS
> Memory: 175720k available (948k kernel code, 2988k data)
> Swansea University Computer Society NET3.033 for Linux 1.3.50
> NET3: Unix domain sockets 0.12 for Linux NET3.033.
> Swansea University Computer Society TCP/IP for NET3.033
> IP Protocols: ICMP, UDP, TCP
> Linux version 1.3.77 (davem@huahaga.rutgers.edu) (gcc version 2.6.3) #15 Mon 
> Apr 1 07:02:51 EST 1996
> Entering SparclinuxMultiPenguin(SMP) Mode...
> Starting CPU 1 at f002a9b8
> Calibrating delay loop.. ok - 115.92 BogoMIPS
> Starting CPU 2 at f002a9d0
> Calibrating delay loop.. ok - 104.86 BogoMIPS
> Starting CPU 3 at f002a9e8
> Calibrating delay loop.. ok - 104.86 BogoMIPS
> Total of 4 Penguins activated (441.14 PenguinMIPS).
> Sparc Zilog8530 serial driver version 1.00
> tty00 at 0xffede004 (irq = 44) is a Zilog8530
> tty01 at 0xffede000 (irq = 44) is a Zilog8530
> tty02 at 0xffedb004 (irq = 44) is a Zilog8530
> tty03 at 0xffedb000 (irq = 44) is a Zilog8530
> Sun TYPE 4 keyboard detected without keyclick
> Sun Mouse-Systems mouse driver version 1.00
> esp0: IRQ 36 SCSI ID 7  Clock 20 MHz Period 99 NCR53C9x(esp236) detected
> scsi0 : Sparc ESP236
> scsi : 1 host.
> Started kswapd v 1.5 
>   Vendor: SEAGATE   Model: ST32430N SUN2.1G  Rev: 0444
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 3, lun 0
> scsi : detected 1 SCSI disk total.
> SCSI Hardware sector size is 512 bytes on device sda
> sunlance.c:v1.5 21/Mar/96 Miguel de Icaza (miguel@nuclecu.unam.mx)
> eth0: LANCE 08:00:20:12:53:32 
> Partition check:
>  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
> Sending BOOTP and RARP requests.....OK
> Root-NFS: Got RARP answer from 128.6.155.101, my address is 128.6.155.53
> Root-NFS: Got file handle for /caip/u119/davem/SparcLinux/machines/jenolan 
> via RPC
> VFS: Mounted root (nfs filesystem).
> # mount -n -t proc none /proc
> # cat /proc/cpuinfo
> cpu           : ROSS HyperSparc RT625
> fpu           : ROSS HyperSparc combined IU/FPU
> promlib               : Version 3 Revision 2
> type          : sun4m
> Elf Support   : yes
> Cpu0Bogo      : 115.50
> Cpu1Bogo      : 115.91
> Cpu2Bogo      : 104.85
> Cpu3Bogo      : 104.85
> MMU type      : ROSS HyperSparc
> invall                : 4020
> invmm         : 0
> invrnge               : 0
> invpg         : 0
> contexts      : 4096
> big_chunks    : 0
> little_chunks : 0
>         CPU0          CPU1            CPU2            CPU3
> State: online         online          online          akp
> Lock:  2              2               2               2
> 
> klock: ff
> block: 0
> alock: 0
> 

<Prev in Thread] Current Thread [Next in Thread>