linux-mips-fnet
[Top] [All Lists]

Ayeee Problem

To: "linux-mips@fnet.fr" <linux-mips@fnet.fr>
Subject: Ayeee Problem
From: Wayne Allen <wayne@dcs.rhbnc.ac.uk>
Date: Sun, 22 Aug 1999 00:21:32 +0100
Greetings after having a DEC5000/25 sitting on my desk for ages I have
finally got around to playing with it.

After setting tftp nfs and all the rest I can boot from a console
(disconnection of the keyboard ), but it gets stuck .... any ideas???

DEC5000/33 No Floppy 500M HD B&W Screen

vmlinux-decr3k.ecoff

Any help or ideas would be most gratefully recieved.


The results of the last boot:-

1400400+0+132400
This DECstation is a Personal DS5000/xx
Loading R[23]00 MMU routines.
CPU revision is: 00000230
Instruction cache 64kb
Data cache 128kb
Linux version 2.2.10 (root@elrond) (gcc version egcs-2.90.27 980315
(egcs-1.0.2 release)) #5 Mon Jul 26 17:25:29 MEST 1999
Calibrating delay loop... 32.83 BogoMIPS
Memory: 14460k/16380k available (1232k kernel code, 428k data)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
TURBOchannel rev. 1 at 12.5 MHz (no parity)
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
DECstation Z8530 serial driver version 0.03
tty00 at 0xbc100001 (irq = 4) is a Z85C30 SCC
tty01 at 0xbc100009 (irq = 4) is a Z85C30 SCC
loop: registered device at major 7
SCSI ID 7  Clock 25 MHz CCF=0 Time-Out 167 NCR53C9x(esp236) detected
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : ESP236
scsi : 1 host.
  Vendor: DEC       Model: RZ25     (C) DEC  Rev: 0900
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 2, lun 0
scsi : detected 1 SCSI disk total.
esp0: target 2 [period 200ns offset 15 5.00MHz synchronous SCSI]
sda: Spinning up disk............ready
SCSI device sda: hdwr sector= 512 bytes. Sectors= 832527 [406 MB] [0.4
GB]
declance.c: v0.008 by Linux Mips DECstation task force
eth0: IOASIC onboard LANCE, addr = 08:00:2b:32:53:77, irq = 3
Unable to handle kernel paging request at virtual address 00000000, epc
== 00000000, ra == 800996ec
Oops: 0000
$0 : 00000000 10002801 00000000 f0060240 00000003 ffffffff 80ff1368
10002801
$8 : 00010000 8018c5e8 00010100 00010000 8016c150 00000020 00000000
80fed4ec
$16: 801800ec 00000000 00000003 80ff1368 80161ae0 801800ec 80180000
80180000
$24: 00000000 10002801                   80ff0000 80ff1340 80160000
800996ec
epc  : 00000000
Status: 10002804
Cause : 00000008
Process  (pid: 0, stackpage=80ff0000)
Stack: 00000000 00000000 00000000 00000000 00000000 00000000 00000003
80ff1440
       8009925c 00000000 00000000 00000000 00000000 00000000 00000000
00000000
       00000000 10002801 bc040120 f0070340 80190000 00010100 801abacc
10002801
       00010000 8018c5e8 00010100 00010000 8016c150 00000020 00000000
80fed4ec
       00000000 00000000 00000003 80ff1440 80161ae0 801800ec 80180000
80180000
       00000000 ...
Call Trace: [<8009925c>] [<8016c150>] [<80161ae0>] [<80160000>]
[<800996ec>] [<80099754>] [<8009925c>] [<8016c150>] [<80161ae0>]
[<80160000>] [<800996ec>] [<80099754>] [<8009925c>] [<8016c150>]
[<80161ae0>] [<80160000>] [<800996ec>] [<80099754>] [<8009925c>]
[<8016c150>] [<80161ae0>] [<80160000>] [<800996ec>] [<80099754>]
[<8009925c>] [<8016c150>] [<80161ae0>] [<80160000>] [<800996ec>]
[<80099754>] [<8009925c>] [<8016c150>] [<80161ae0>] [<80160000>]
[<800996ec>] [<80099754>] [<8009925c>] [<8016c150>] [<80161ae0>]
[<80160000>] [<800996ec>] ...
Code: (Bad address in epc)

Aiee, killing interrupt handler
Kernel panic: Attempted to kill the idle task!
In interrupt handler - not syncing


------------------

Thanks

Wayne
wayne@dcs.rhbnc.ac.uk



<Prev in Thread] Current Thread [Next in Thread>