linux-mips-fnet
[Top] [All Lists]

Booting 5000/240 from disk...

To: linux-mips@fnet.fr
Subject: Booting 5000/240 from disk...
From: Karel van Houten <K.H.C.vanHouten@research.kpn.com>
Date: Tue, 25 May 1999 19:26:45 +0200 (MET DST)
Cc: K.H.C.vanHouten@research.kpn.com (Houten K.H.C. van )
Hi all, specially Harald :-)

My 260 boots fine from disk, using the NetBSD 1.0 bootloaders. So now
I tried this on a 240 (with a buggy prom that doesn't tftpboot), and
it just hang. I used the same kernel source / config as on my 260,
just changed the CPU type (the same kernel build runs fine over netboot
on a 3100).

Here are the 'last words'....

>>cnfg 3
 3: KN03-AA  DEC      V5.1b    TCF0  ( 32 MB)
                                     (enet: 08-00-2b-30-8b-e0)
                                     (SCSI = 7)
            ---------------------------------------------------
            DEV   PID                VID        REV    SCSI DEV
            ===== ================== ========== ====== ========
            rz1   RZ56     (C) DEC   DEC        0400   DIR
            rz3   RZ57     (C) DEC   DEC        5000   DIR

        dcache( 64 KB), icache( 64 KB)
        mem( 0):  a0000000:a07fffff  (  8 MB)
        mem( 1):  a0800000:a0ffffff  (  8 MB)
        mem( 2):  a1000000:a17fffff  (  8 MB)
        mem( 3):  a1800000:a1ffffff  (  8 MB)

>>boot 3/rz3/vmlinux -- console=ttyS2 root=/dev/nfs rw single
>> NetBSD/pmax Secondary Boot, Revision 1.0
>> (root@mona, Fri May  7 14:50:29 EST 1999)
Boot: 3/rz3/vmlinux
1366960+124128/[190+96192+90839]=0x199f3c
Starting at 0x800405cc

This DECstation is a DS5000/2x0

<Then nothing...>

-- 
Karel van Houten

----------------------------------------------------------
The box said "Requires Windows 95 or better."
I can't understand why it won't work on my Linux computer. 
----------------------------------------------------------

<Prev in Thread] Current Thread [Next in Thread>