linux-mips-fnet
[Top] [All Lists]

Re: DECstation: linux-2.1.99 is out!

To: linux-mips@fnet.fr
Subject: Re: DECstation: linux-2.1.99 is out!
From: "Houten K.H.C. van (Karel)" <K.H.C.vanHouten@research.kpn.com>
Date: Fri, 05 Jun 1998 15:19:47 +0200
Cc: K.H.C.vanHouten@research.kpn.com
In-reply-to: "Your message of Tue, 02 Jun 1998 18:23:16 +0200." <XFMail.980602182316.harald.koerfgen@netcologne.de>
Reply-to: K.H.C.vanHouten@research.kpn.com
Hi Harald.

I tried your new kernel, using just your configuration (even r3000 cpu)

This was what I got:

==========================================================================
KN05 V2.1k    (PC: 0xa002cab8, SP: 0xffffdeb0)

>>boot 3/tftp

-tftp boot(3), bootp.139.63.193.80:/tftpboot/nbImage.
-tftp load 875056+3472+97728
Linux/MIPS DECstation Boot
Copyright (C) Paul M. Antoine 1995, 1996, 1997
and others, 1994, 1995, 1996, 1997, 1998

Found a REX compatible boot PROM
This DECStation is a DS5000/2x0 with 98304kB RAM
CPU is a R4400SC with 16kB I-Cache and 16kB D-Cache
Got the following for the console env. variable: s
Should set to serial console...
Will be using PROM console!
Moving Kernel Image from 80200000 to 80030000
Launching Kernel ...

==========================================================================
Then I get a reset.
It looks like you got the CPU detection right!

I will apend the boot messages from the NetBSD1.3.2 kernel, which is running
on this machine currently.
==========================================================================
KN05 V2.1k    (PC: 0xa002cab8, SP: 0x802ee4d8)
3/prcache                                                   >>boot 3/rz2/netbsd
Boot: 3/rz2/netbsd
Size: 1249280+55760+106548
Starting at 0x80030000

[ preserving 94536 bytes of netbsd symbol table ]
Using PROM serial output until serial drivers initialized
Copyright (c) 1996, 1997, 1998
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3.2 (GENERIC) #0: Tue May 12 16:23:11 PDT 1998
    jonathan@Cuisinart.Stanford.EDU:/cuisinart/NetBSD/NetBSD-stable/compile/GEN
ERIC
real mem = 100663296
avail mem = 86269952
using 2457 buffers containing 10063872 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R4400 CPU Rev. 4.0 with MIPS R4010 FPC Rev. 0.0
        L1 cache: 16kb Instruction, 16kb Data. L2 cache: 1024kb mixed.
tc0 at mainbus0: 25 MHz clock
asic0 at tc0 slot 3 offset 0x0
le0 at asic0 offset 0xc0000 priority 4: address 08:00:2b:37:63:76
le0: 32 receive buffers, 8 transmit buffers
scc0 at asic0 offset 0x100000 priority 6
scc1 at asic0 offset 0x180000 priority  (In sccattach: cn_dev = 0x1102) (Unit 
= 1): console
clock0 at asic0 offset 0x200000 priority 0: mc146818 or compatible
asc0 at asic0 offset 0x300000 priority 3: target 7
sfb0 at tc0 slot 0 offset 0x0 (1280x1024x8) (console)
Beginning old-style SCSI device autoconfiguration
rz2 at asc0 drive 2 slave 0 DEC RZ57     (C) DEC rev 5000
rz2: 954MB, 1928 cyl, 15 head, 67 sec, 512 bytes/sect x 1954050 sectors
rz4 at asc0 drive 4 slave 0 DEC RZ57     (C) DEC rev 5000
rz4: 954MB, 1928 cyl, 15 head, 67 sec, 512 bytes/sect x 1954050 sectors
boot device: rz2
root on rz2a dumps on rz2b
root file system type: ffs
swapctl: adding /dev/rz2b as swap device at priority 0

==========================================================================

Next week I want to try a kernel built for a r4x00 cpu. Or do you have
other suggestions?

Thanks a lot!

Regards,
Karel.

-- 
Karel van Houten     
KPN Research, The Netherlands
Internet: K.H.C.vanHouten@research.kpn.com


<Prev in Thread] Current Thread [Next in Thread>