linux-mips-fnet
[Top] [All Lists]

It booooooooooots!

To: linux-mips
Subject: It booooooooooots!
From: Systemkennung Linux <linux@informatik.uni-koblenz.de>
Date: Wed, 9 Apr 1997 12:11:37 +0200 (MET DST)
This is one I couldn't resist to forward ...

  Ralf

Forwarded message:
> From: Mike Shaver <shaver@neon.ingenia.ca>
> Message-Id: <199704082223.SAA03675@neon.ingenia.ca>
> Subject: It booooooooooots!

[..]

> >> boot -f bootp()neon.ingenia.ca:/vmlinux
> Setting $netaddr to 205.207.220.72 (from server neon.ingenia.ca)
> Obtaining /vmlinux from server neon.ingenia.ca
> PROMLIB: SGI ARCS firmware Version 1 Revision 10
> PROMLIB: Total free ram 65208320 bytes (63680K,62MB)
> Loading R4000 MMU routines.
> CPU REVISION IS: 00002310
> Primary ICACHE 32K (linesize 32 bytes)
> Primary DCACHE 32K (linesize 32 bytes)
> R4600/R5000 SCACHE size 512K linesize 128 bytes
> ARCH: SGI-IP22
> CPU: MIPS-R5000 FPU<MIPS-R5000FPC> ICACHE DCACHE SCACHE
> MC: SGI memory controller Revision 3
> calculating r4koff... 000bd678(775800)
> zs0: console input
> zs0: console I/O
> Calibrating delay loop.. ok - 154.83 BogoMIPS
> Memory: 60564k/196604k available (792k kernel code, 2988k data)
> Swansea University Computer Society NET3.035 for Linux 2.0
> NET3: Unix domain sockets 0.12 for Linux NET3.035.
> Swansea University Computer Society TCP/IP for NET3.034
> IP Protocols: ICMP, UDP, TCP
> Checking for 'wait' instruction...  unavailable.
> Linux version 2.0.12 (dm@neteng) (gcc version 2.7.2) #2 Mon Aug 12 04:43:30 
> PDT6
> SGI Zilog8530 serial driver version 1.00
> tty00 at 0xbfbd9838 (irq = 21) is a Zilog8530
> tty01 at 0xbfbd9830 (irq = 21) is a Zilog8530
> PS/2 auxiliary pointing device detected -- driver installed.
> WD93: Driver version 1.21 compiled on Aug 12 1996 at 04:20:18
> wd33c93-0: chip=WD33c93B microcode=0d
> scsi0 : SGI WD93
> scsi : 1 host.
> Started kswapd v 1.3
>   Vendor: SGI       Model: IBM DORS-32160    Rev: W80D
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
>   Vendor: CONNER    Model: CFP2107S  2.14GB  Rev: 172B
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sdb at scsi0, channel 0, id 6, lun 0
> scsi : detected 2 SCSI disks total.
> SCSI device sda: hdwr sector= 512 bytes. Sectors= 4197405 [2049 MB] [2.0 GB]
> SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4194304 [2048 MB] [2.0 GB]
> sgiseeq.c: David S. Miller (dm@engr.sgi.com)
> eth0: SGI Seeq8003 08:00:69:0a:2a:9b
> Partition check:
>  sda: sda1 sda2 sda3 sda4
>  sdb: sdb1 sdb2 sdb3 sdb4
> Sending BOOTP and RARP requests............
> 
> Doesn't seem to want to find the server again for the NFS root thing,
> but that's probably a config problem.
> 
> _Now_ we're ready to rock...
> 
> Mike
> 
> -- 
> #> Mike Shaver (shaver@ingenia.com) Ingenia Communications Corporation 
> #>       Chief System Architect -- Head geek -- System exorcist        
> #>                                                                     
> #>   "Have you considered a life?  I hear they're quite affordable     
> #>          these days." --- shields@tembel.org                        

<Prev in Thread] Current Thread [Next in Thread>