freecwmp
[Top] [All Lists]

Re: Periodic Inform Enable and Connection Request

To: akhil garg <akhilgarg7@gmail.com>
Subject: Re: Periodic Inform Enable and Connection Request
From: Luka Perkov <freecwmp@lukaperkov.net>
Date: Sat, 2 Mar 2013 00:58:23 +0100
Cc: freecwmp@linux-mips.org
In-reply-to: <CA+mgNr62jPPet7xiJWU=SRtSJTXmiOH0RKqx3jr1cr7+wUsF2w@mail.gmail.com>
Mail-followup-to: akhil garg <akhilgarg7@gmail.com>, freecwmp@linux-mips.org
Original-recipient: rfc822;freecwmp@linux-mips.org
References: <CA+mgNr62jPPet7xiJWU=SRtSJTXmiOH0RKqx3jr1cr7+wUsF2w@mail.gmail.com>
Sender: freecwmp-bounce@linux-mips.org
User-agent: Mutt/1.5.21 (2010-09-15)
On Tue, Feb 26, 2013 at 01:45:56PM +0000, akhil garg wrote:
> What configuration is required on freecwmp client for the following?
> 1. To enable Periodic Inform.

When ACS sets periodic inform it is shown in the freecwmp config like this:

config cwmp
        option parameter 
'InternetGatewayDevice.ManagementServer.PeriodicInformEnable'
        option value '1'

config cwmp
        option parameter 
'InternetGatewayDevice.ManagementServer.PeriodicInformInterval'
        option value '60'

The above configuration will enable periodic inform and freecwmp will
connect to the ACS every minute. You can set this directly in freecwmp
config manually.

> 2. To send the Connection Request from ACS

That you need to run on your ACS and is not freecwmp related. On the
freecwmp you only need to configure correct interface.

Luka

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Periodic Inform Enable and Connection Request, Luka Perkov <=