freecwmp
[Top] [All Lists]

[PATCH 08/27] Update lan_device script to support communicte data of get

To: freecwmp@linux-mips.org
Subject: [PATCH 08/27] Update lan_device script to support communicte data of get parameter values to the core via ubus Contributed by Inteno Broadband Technology AB
From: Mohamed <mohamed.kallel@pivasoftware.com>
Date: Thu, 6 Dec 2012 16:54:33 +0100
Cc: freecwmp@lukaperkov.net, Mohamed <mohamed.kallel@pivasoftware.com>, Ahmed ZRIBI <ahmed.zribi@pivasoftware.com>
In-reply-to: <1354809292-2467-1-git-send-email-mohamed.kallel@pivasoftware.com>
Original-recipient: rfc822;freecwmp@linux-mips.org
References: <mohamed.kallel@pivasoftware.com> <1354809292-2467-1-git-send-email-mohamed.kallel@pivasoftware.com>
Sender: freecwmp-bounce@linux-mips.org
Signed-off-by: Ahmed ZRIBI <ahmed.zribi@pivasoftware.com>
Signed-off-by: Mohamed <mohamed.kallel@pivasoftware.com>
---
 ext/openwrt/scripts/functions/lan_device |   13 +++++++++++--
 1 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/ext/openwrt/scripts/functions/lan_device 
b/ext/openwrt/scripts/functions/lan_device
index 5ba513c..fa9dda4 100644
--- a/ext/openwrt/scripts/functions/lan_device
+++ b/ext/openwrt/scripts/functions/lan_device
@@ -3,6 +3,7 @@
 
 get_wlan_enable() {
 local num="$1"
+local type="xsd:boolean"
 local val=`/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} get 
wireless.@wifi-device[$num].disabled 2> /dev/null`
 let num=$num+1
 if [ "$val" = "1" ]; then
@@ -10,7 +11,7 @@ if [ "$val" = "1" ]; then
 else
        val="1"
 fi
-freecwmp_output 
"InternetGatewayDevice.LANDevice.1.WLANConfiguration.$num.Enable" "$val"
+ubus_freecwmp_output 
"InternetGatewayDevice.LANDevice.1.WLANConfiguration.$num.Enable" "$val" "$type"
 }
 
 set_wlan_enable() {
@@ -29,7 +30,7 @@ get_wlan_ssid() {
 local num="$1"
 local val=`/sbin/uci ${UCI_CONFIG_DIR:+-c $UCI_CONFIG_DIR} get 
wireless.@wifi-iface[$num].ssid 2> /dev/null`
 let num=$num+1
-freecwmp_output 
"InternetGatewayDevice.LANDevice.1.WLANConfiguration.$num.SSID" "$val"
+ubus_freecwmp_output 
"InternetGatewayDevice.LANDevice.1.WLANConfiguration.$num.SSID" "$val"
 }
 
 set_wlan_ssid() {
@@ -44,30 +45,38 @@ case "$1" in
        InternetGatewayDevice.)
        get_wlan_enable 0
        get_wlan_ssid 0
+       return $FAULT_CPE_NO_FAULT
        ;;
        InternetGatewayDevice.LANDevice.)
        get_wlan_enable 0
        get_wlan_ssid 0
+       return $FAULT_CPE_NO_FAULT
        ;;
        InternetGatewayDevice.LANDevice.1.)
        get_wlan_enable 0
        get_wlan_ssid 0
+       return $FAULT_CPE_NO_FAULT
        ;;
        InternetGatewayDevice.LANDevice.1.WLANConfiguration.)
        get_wlan_enable 0
        get_wlan_ssid 0
+       return $FAULT_CPE_NO_FAULT
        ;;
        InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.)
        get_wlan_enable 0
        get_wlan_ssid 0
+       return $FAULT_CPE_NO_FAULT
        ;;
        InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.Enable)
        get_wlan_enable 0
+       return $FAULT_CPE_NO_FAULT
        ;;
        InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.SSID)
        get_wlan_ssid 0
+       return $FAULT_CPE_NO_FAULT
        ;;
 esac
+return $FAULT_CPE_INVALID_PARAMETER_NAME
 }
 
 set_lan_device() {
-- 
1.7.4.1


<Prev in Thread] Current Thread [Next in Thread>